Intelli-Z2 System Management Processor

Based on the recognised and respected Intelli-X2 series platform, the new Intelli-Z2 provides the same level of power, control and performance, but in an installation-friendly package.

Apex Intelli-Z2 System Management Processor

For many audio systems installed in fixed installations (such as theatres, conference centres etc.) it is common to find system processors hidden away and very often left untouched in remote amp- or control-rooms. Utilising the full power of the Apex Intelli-Ware remote control software application with integral analyser-bridge, the new Intelli-Z2 system management processor is designed specifically with such installations in mind. With its 4 in/8 out configuration, integral mixer and selectable analogue/AES-3 I/O (but without the additional costs of unnecessary hardware controls) the Intelli-Z2 is a powerful, yet cost-effective system management solution specifically for use in fixed installations.

Specifications

Balanced line level inputs

Connectors: 3-pin XLR (software switch-able between analog and AES-3)

Type: electronically balanced

Impedance: >10k ohms, balanced

Common mode rejection: >90dB

Max input level: 18, 21, 24 or 27 dBu software selectable, balanced, 1% THD+N

Frequency response: 20 Hz - 20 kHz, ±0.5 dB

THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW

Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings

Crosstalk: >90 dB

AD conversion: 24-bit, sigma-delta

Balanced line level outputs

Connector: 3-pin XLR (software switch-able between analog and AES-3)

Type: electronically balanced

Impedance: <50 ohms, balanced

Max output level: 15, 18, 21, 24 dBu software selectable, into 600 ohms, balanced, 1%

THD+N

Frequency response: 20 Hz - 20 kHz, ±0.5 dB

THD+N: less than 0,005%, +4 dBu, 20Hz- 20 kHz, 22 kHz BW

Dynamic range: 120 dB, 20 Hz to 20kHz, un-weighted at +21dBu headroom settings

Crosstalk: >90 dB

DA conversion resolution: 24-bit

AES-3 inputs

Connector: 3-pin XLR (software switch-able between analog and AES-3)

Type: transformer isolated

Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced

Supported formats: AES-3 and SPDIF up to 24-bit

Supported sample rates: 32 to 192 kHz

AES-3 outputs

Connector: 3-pin XLR (software switch-able between analog and AES-3)

Type: transformer isolated

Impedance: 110 ohms or 75 ohms selectable (internal jumper), balanced

Word-clock input

Connector: BNC

Termination: 75 ohms switch-able

Input level: 1 to 10 Vpp

Word clock output

Connector: BNC

Impedance: 75 ohms

Output level: TTL 5 Vpp

Digital processing

Sample rate: 44,1kHz, 48kHz, 88,2kHz, 96kHz, 176,4kHz or 192kHz selectable

Internal processing: 32-bit floating point

Input / output channel:

Intelli-Z2: 4 in x 8 out

Network remote control

Built-in Ethernet switch: IEEE 802.3 10Base-T/100Base-TX

Connectors: 3 x Neutrik EtherCon, Auto MDI-MDIX

Protocol: Proprietary UDP/IP based, SNMP

RS-232

Connector: D-sub 9-pin female

Mains

Connector: Neutrik PowerCon

Voltage: Auto-detect 100-240 Vac (+/- 10 %) - 50-60 Hz

Power consumption: Intelli-Z2 < 60 VA

Input channels functions

Gain: -80 to +15dB, 0,1dB steps

Polarity: normal / inverted

Delay:

Duration: 0 to 1500ms, sample rate depend steps,

Distance: 0 to 500m

Temperature: -20 to 50°C, 0,1° steps

Relative humidity: 0 to 100%, 1% steps

GEQ: 30-band ISO centred, +/-15 dB, proportional-Q or constant-Q mode

selectable

PEQ:

Bands 12

Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-

Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-

Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass

Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q

12dB/oct, Band-Pass

Frequency: 10Hz to 22kHz, 0,1Hz steps

Gain: -40 to +15dB, 0,1dB steps (when applicable)

Q: 0,1 to 48, 0,01dB steps (when applicable)

Compressor:

Threshold: -80 to 0dBfs, 0,1dB steps

Ratio: 1:1 to 50:1, 1 steps

Knee: hard or soft

Attack time: 0,5 to 100ms, 0,1ms steps

Release time: 5 to 5000ms, 0,1ms steps

Side-chain mode: flat, high-pass or band-pass mode

Make-up gain: -20 to +20dB, 0,1 steps

Mix matrix functions

Gain: -80 to +15dB, 0,1dB steps

Routing: enabled/disabled

Output channel functions

Delay:

Duration: 0 to 1500ms, sample rate depend steps,

Distance: 0 to 500m

Temperature: -20 to 50°C, 0,1° steps

Relative humidity: 0 to 100%, 1% steps

Driver alignment:

Duration: 0 to 30ms, sample rate depend steps,

Distance: 0 to 10000cm, 0,1cm steps

Temperature: -20 to 50°C, 0,1° steps

Relative humidity: 0 to 100%, 1% steps

PEQ:

Bands 12

Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low-

Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All-

Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass

Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q

12dB/oct, Band-Pass

Frequency: 10Hz to 22kHz, 0,1Hz steps

Gain: -40 to +15dB, 0,1dB steps (when applicable)

Q: 0,1 to 48, 0,01dB steps (when applicable)

High-pass and low-pass crossover:

Filter types: Butterworth 6 to 48dB/octave, 6dB steps

Linkwitz-Riley 12 to 48dB/octave, 12dB steps

Bessel 12 to 48dB/octave, 6dB steps

Frequency: 10Hz to 20kHz, 0,1Hz steps

FIR filters:

At 48 kHz: 5 x 1024 taps or 8 x 512 taps

At 96 kHz: 3 x 1024 taps or 8 x 512 taps

Gain: -80 to +15 dB, 0,1 dB steps

Polarity: normal / inverted

Limiter:

Type: Dual-stage, RMS + Peak limiter

RMS threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps

Peak threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps

RMS attack: 0,5 to 100 ms, 0,1 ms steps

Peak attack: 0ms

Release: 5 to 10000 ms, 0,1 ms steps

Environment

Operating

Temperature: 0° to 50° C

Relative humidity: 10 to 60 %, non-condensing

Storage

Temperature: -20° to 70° C

Mechanical specifications

Width: 483 mm (19-inch)

Height: 43,6 mm (1,75-inch - 1U)

Depth: 286 mm

Package

Width: 575 mm

Height: 110 mm

Depth: 355 mm

Weight

Unit (Nett):

Intelli-Z2 3,75 kg

Package (Shipping):

Intelli-Z2 5,5 kg

© 2017 Group Technologies Australasia Pty Ltd ACN 072 549 010 | Privacy | Terms of Trade