RCF HDL 10-A Active Line Array Module

The very compact size, no compromise transducers and a unique composite cabinet design make the HDL 10-A the perfect tool in many situations.

Ideal in live sound reinforcement and reliable installed situations, the HDL 10-A is the ideal choice when line array performance is needed along with fast and easy set up. The system is powered from a 1400 Watt Peak Power 2 way digital amplifier while sound is processed by the powerful on-board DSP.

RCF HDL 10-A Active Line Array Module

Featuring 2 x 8-inch woofers, a single 2.5-inch titanium compression driver, digital amplifier with switch mode power supply and DSP controlled Input section with selectable presets; the HDL 10-A is packed with the latest in RCF loudspeaker technology. Delivering an impressive 133dB max SPL; 1400 Watt peak power (700 Watts RMS) and 65Hz – 20kHz frequency response; this array provides a new level of performance by the Italian innovators at RCF.

RCF HDL 10-A Active Line Array Module Back Panel

Features

  • 1400 Watt Peak power - 700 Watt RMS
  • 133 dB max SPL
  • 65 Hz 20 kHz frequency response
  • 2 x 8" Woofers
  • 1 x 2" Compression Driver
  • DSP controlled Input section with selectable presets
  • Tour grade safe and solid variable mechanics
  • Composite PP enclosure structurally wooden reinforced

Applications

  • Live sound
  • Rental
  • Portable PA, clubs, ballrooms, live theatre
  • House of worship
  • Theme parks
  • Music playback and sound reinforcement in small and mid-size venues
  • Corporate A/V professionals and sound system hire companies

Amplification & Set up

DSP PROCESSING

The HDL 10-A is powered by a 1400W peak power digital amplifier, split 200W for the HF and 500W for the LF. A new generation DSP handles all the processing within the cabinet and allows adjustment of Cluster size and HF projection. The DSP also includes presets for indoor/outdoor usage and highly curved arrays. All these setting are accessed by the buttons on the rear of the cabinets.

The easy to access controls on the back of the speaker allow a number of simple optimisations to be carried out at the flick of a switch: two possible HF settings, four possible cluster configurations; a special EQ setting for high curved configurations and an Indoor Correction EQ.

INPUT / LINK

INPUT / LINK

MAIN XLR INPUT (BAL/UNBAL)

The system accept female XLR input connectors and line level signals from a mixing console or other signal source.

LINK XLR OUTPUT

The output XLR male connector provides a loop trough for speakers daisy chaining.

Volume knob

Volume knob

Controls the volume of the power amplifier. The control ranges from - (maximum attenuation) to the MAX level (maximum output).

Status indicators

Status indicators

POWER INDICATOR

Power on indicator. When the power cord is connected and the power switch is turned on this indicator lights green.

SIGNAL INDICATOR

The signal indicator lights green if there is signal present on the main XLR input.

LIMITER INDICATOR

The amplifier has a built in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers. When the peak clipping circuit is active the LED blinks orange. It is okay if the limit LED blinks occasionally. If the LED blinks frequently or lights continuously, turn down the signal level. The amplifier has a built in RMS limiter. If the RMS limiter is active the LED lights red. The RMS limiter has the purpose to prevent damages the transducers. The speaker shall never be used with the limit indicator red, continuous operation with the RMS protection active can cause damages to the speaker.

HF Switch

HF Switch

HF. The switch gives the possibility to set high frequencies correction depending on target distance (air absorption correction):

  • NEAR (used for pole mount applications or near field)
  • FAR (for farthest field).

Cluster Switch

Cluster Switch

The combination of the 2 switches gives 4 possibilities of mid low frequencies correction depending on cluster size.

  • 2-3 modules (used for pole mount applications ground stacking)
  • 4-6 modules (small flown systems)
  • 7-9 modules (medium flown systems)
  • 10-16 modules (maximum flown configuration).

HIGH CURVING Switch

HIGH CURVING Switch

The switch gives the extra possibility to boost mid frequencies depending on a high curving cluster configuration of few pieces.

  • OFF (not active correction)
  • ON (for high curving arrays of few pieces HDL10A).

INDOOR Switch

INDOOR Switch

The switch gives the extra possibility to set low frequencies correction depending on a indoor/outdoor use, in order to compensate room reverberation on lows.

  • OFF (not active correction)
  • ON (correction for reverberant indoor rooms).

AC PANEL

AC PANEL

AC POWERCON RECEPTACLE.

RCF D LINE uses a POWERCON locking 3-pole AC mains. Always use the specific power cord provided in the package.

AC POWERCON LINK RECEPTACLE.

Use this receptacle to link one or more units. Always make sure that the maximum current requirement does not exceed the maximum admitted POWERCON current. In case of doubt call the closest RCF SERVICE CENTRE.

POWER MAIN SWITCH.

The power switch turns the AC power ON and OFF. Make sure that the VOLUME is set to - when you turn on the speaker.

RCF Shape Designer Software

In order to assist with the set up procedures for the HDL 10-A line array system, RCF has developed a complete prediction software package.

The software enables a complete two dimensional simulation of the behaviour of the HDL 10-A modules and also suggest the correct subwoofer combination.

The system curvature angles and the sound projection data are computed with maximum sound pressure levels for the given design.

The software will allow simulations up to a maximum of sixteen HDL 10-A systems.

The rigging menu provides data for weight, centre of gravity and length of the array configuration. Rigging points and rigging hardware configurations are also computed.

RCF Shape Designer Software Screen

Specifications

Acoustical Specifications
Frequency Response -3 dB: 65 Hz ÷ 20000 Hz
Max SPL : 133 dB
Horizontal coverage angle:  100°
Vertical coverage angle:  15°
Compression Driver:  2", 2.5" voice coil
Woofer: 2 x 8", 2.0" voice coil 
Input/Output Section 
Input signal:  bal/unbal
Input connectors:  XLR
Output connectors:  XLR
Input sensitivity: -2 dBu / +4 dBu
Processor Section 
Crossover frequencies: 800 Hz
Protections: thermal, RMS
Limiter:  Soft limiter
Controls: Cluster, HF, High curving, Indoor
Amplifier Specifications
Total power: 1400 W PEAK
High frequencies:  400 W PEAK
Low frequencies: 1000 W PEAK
Total power: 700 W RMS
High frequencies:  200 W RMS
Low frequencies: 500 W RMS
Connections:  Powercon in/out
Cooling: Convection
Cabinet
Cabinet Material:  Composite PP, wooden reinforced
Hardware:  Rigging flyware
Handles:  2 side
Colour:   Black
Physical Specifications
Height: 294mm
Width:  569 mm
Depth:  434 mm
Net Weight:  25.4 kg

Tech Downloads

Software Downloads

© 2017 Group Technologies Australasia Pty Ltd ACN 072 549 010 | Privacy | Terms of Trade