ART 310-A MK III Active, 2-way 350-w Bi-amplified, 10" Woofer

RCF ART 310-A MK III is an active, 2-way speaker system, 350-w bi-amplified. It integrates a high power, a complete electronic processor section and RCF low distortion, high power neodymium transducers.

ART 310-A Active, 2-way Speaker System, 350-w Bi-amplified, 10

The system is unique in its class for output and vocal intelligibility. The new 10" neodymium woofer is the result of the latest refinement in year of RCF experience in compact 2 way speakers. Features a 2.5" voice coil, very high efficiency and controlled bass reproduction.

The compression driver uses a new 1.5" Mylar dome design and optimised geometry radial phase plug. This innovative design is powered from a high flux neodymium magnet offering a very open and natural midrange sound with extreme precision in high frequency reproduction. A generous 2-step class-H design is used to power the low frequencies and the compression driver amplifier is a warm and clear class AB design.

Incredibly lightweight, ART 310-A uses high efficiency TAED amplifier and neodymium woofer and compression driver for the maximum output in the minimum weight ever seen in the 10" active speaker.

The input section presents a XLR input connector that is switchable from microphone to line levels. A master volume control and a useful XLR loop through link guarantee the best versatility. The processor section includes active crossover, system equalisation, transducers phase alignment, limiter and protection functions. The system is visually monitored from 4 status LEDs.

All the system is housed in a strong, very lightweight, polypropylene composite enclosure. The woofer is protected with a strong, powder coated, metal grille. The cabinet features 2 M10 threaded fly points, a 35 mm stand adaptor plus an ergonomic top handle for easy transportation.

Acoustical Specifications

ART 310-A with ART 705 AS used as Sub-Woofer

Freq. Range (-10 dB): 50 - 20 kHz
Max SPL: 127dB
Coverage angle: 90° x 70°
Compression driver neo1"
Woofer: 10"

Input Section

Input Signal Impedance: Balanced/Unbalanced
Input Connector: Jack/XLR
Output Signal Connector: XLR
Input sensitivity: 0 dBu

Processor Section

Crossover Frequencies: 1800 Hz
Protections: DC/Short Circuit
Limiter: Fast Limiter
Master Vol. Music/Voice EQ: Yes

Amplifier

Nominal Power: 350-Watt
High Frequencies: ab/50-Watt
Low Frequencies: H/300-Watt
Cooling: Convection

Physical Specifications

Height: 537mm
Width: 337mm
Depth: 315mm
Net Weight: 12.4Kg
Cabinet: Composite PP
Hardware: Two M10 flying points
Handles: 1 Top
Pole-Mount/Cap: Yes
Colour: Anthracite Grey

© 2017 Group Technologies Australasia Pty Ltd ACN 072 549 010 | Privacy | Terms of Trade