ART 312 2-way Speaker, 300-w, 15" Woofer
ART 312, ideal for any installation and offers the same careful acoustic design and innovative transducers used in the active series.
*available with optional grill
Very good bass reproduction and extremely accurate high frequencies, ART 315 is the perfect solution for playback and installation situations where an external amplifier is required.
ART 312, ideal for live sound situations, offer the same careful acoustic design and innovative transducers used in the active series. Very good punch in bass reproduction and extremely accurate high frequencies, ART 315 is the perfect solution for playback and installation situations where an external amplifier is required. RCF ART 312 and the RCF ART 315 are a wide dispersion, 2 way sound reinforcement speaker. Integrates a high power LICC high level crossover network and RCF low distortion, high power transducers. The new 15" inch and 15" woofer are the result of the latest refinement in years of RCF experience in compact 2 way speaker manufacturing, resulting in an accurate reproduction of the midbass frequency range and a tight punchy bass.
The compression driver uses a new 1.5" titanium dome in front of a low compression, optimised geometry, radial phase plug. This innovative design is powered from a high flux neodymium magnet and offers a very open and natural midrange sound and extreme precision in high frequency reproduction. Our LICC low impedance compensated crossover network featuring lower (than conventional) induction value in series with the woofer offer delay reduction, reduced phase shift and superior transient response. The compression driver is protected by a fast dynamic electronic circuit. The input section presents 2 x NL4 Speakon connectors offering an easy loop-through link.
Features
- 300 watt power handling
- 127/128 dB SPL peak
- Wide dispersion, 90° x 60° low distortion, constant directivity horn
- 12"/15" high power woofer, 64mm edge wound aluminium coil
- 1" neodymium, titanium dome, high frequency driver
- LICC low impedance compensated crossover, electronic driver protection
- 2x NL4 Speakon® connector
- Two side handles and 1 ergonomic top handle for easy transportation and positioning
- Four M10 fly points and pole mount adaptor.
Acoustical Specifications
Frequency Response | 50 - 20 kHz |
Max SPL: | 128dB |
Sensitivity 1w/1m: | 98 |
Coverage angle: | 90° x 60° |
Compression driver | neo1" |
Woofer: | 12"/15" |
Power Handling: | 300W |
Input Section | |
Input Signal Impedance: | 8Ω |
Input Connector: | Speakon® |
Output Signal Connector: | Speakon® |
Physical Specifications
Height: | 680mm |
Width: | 407mm |
Depth: | 347mm |
Net Weight: | 16Kg/17Kg |
Cabinet: | Composite PP |
Hardware: | Four M10 flying points |
Handles: | 2 Side, 1 Top |
Pole-Mount/Cap: | Yes |
Colour: | Anthracite Grey |