Camco Tecton Series

The Tecton Series is the newest line from Camco offering in total 6 amplifiers up to 2 x 1900 Watt/4 Ω. The models are optimised for use with either higher or lower impedances. It contains our latest developments in High-Efficient-SMPS (Switch-Mode-Power-Supply) as well as our well-known Superior Sound Amplifier-Designs.

Features

CAMCO Tecton front panel

  • High-Efficient-SMPS (Switch-Mode-Power-Supply)
  • 3 Operations Modes: Parallel Mono, Mono Briged, Stereo
  • Output Current Monitoring
  • LED Indicators Operation Mode, Clip, Signal, Output Current
  • Input Sensitivity Selector
  • Selectable Clip-Limiter
  • Selectable Subsonic Filter
  • Ground Lift
  • DC Protection
  • Mains Fuse Protecion
  • Overvoltage Protection
  • Simple-Remote-Control optionally available

Camco Tecton Specifications

.2 Series (2 Ω optimized) .4 Series (4 Ω optimized)
Tecton 14.2 22.2 28.2 24.4 32.4 38.4
STEREO MODE, both Channels driven
8 Ω 20 Hz-20 kHz 0,1% THD 226 W 355 W 517 W 698 W 918 W 1136 W
4 Ω 20 Hz-20 kHz 0,1% THD 420 W 660 W 920 W 1216 W 1595 W 1900 W
2 Ω 20 Hz-20 kHz 0,1% THD 730 W 1140 W 1420 W N/A N/A N/A
MONO BRIDGED
16Ω 20 Hz-20 kHz 0,1% THD 452 W 710 W 1034 W 1396 W 1836 W 2272 W
8 Ω 20 Hz-20 kHz 0,1% THD 840 W 1320 W 1840 W 2432 W 3190 W 3800 W
4 Ω 20 Hz-20 kHz 0,1% THD 1460 W 2280 W 2840 W N/A N/A N/A
PARALLEL MONO
8 Ω 20 Hz-20 kHz 0,1% THD 452 W 710 W 1034 W 1396 W 1836 W 2272 W
2 Ω 20 Hz-20 kHz 0,1% THD 840 W 1320 W 1840 W 2432 W 3190 W 3800 W
1 Ω 20 Hz-20 kHz 0,1% THD 1460 W 2280 W 2840 W N/A N/A N/A
ALL MODELS
Input Gain selectable: 26 dB, 32 dB, or 1,4 V input sensitivity
Output Circuitry AB AB 2-Step Class H 2-Step Class H 2-Step Class H 2-Step Class H
SMPTE (typical) 20 Hz-20 kHz, 8 Ω load 3 dB below rated power THD+N (typical) < 0,02% THD
20 Hz-20 kHz, 8 Ω load 3 dB below rated power < 0,02% THD
Frequency Response 20 Hz-20 kHz, ± 0,2 dB / 8 Hz-50 kHz, +0, -3 dB
Damping Factor > 400
Input Impedance 40 k Ω balanced
Fan temperature dependent speed-controlled axial fan
Connectors, each channel Input: 3-pin XLR & 1/4" TRS balanced Output: Neutrik Speakon
Limiter switchable peak-limiter
Ground-Lift input ground-lift switch on back panel
Signal To Noise-Ratio 20 Hz - 20 kHz, 8 Ω load > 107 dB (unweighted) > 110 dB (A-weighted)
Dimensions (W x H x D) 483 x 88,9 x 340 mm (19", 2U)
Weight 9 kg

Tech Downloads

Sales Brochures

Media Resources

© 2017 Group Technologies Australasia Pty Ltd ACN 072 549 010 | Privacy | Terms of Trade