Nexo GEO T4805 Tangent Array Module
T4805 Vertical Tangent Array Module incorporates the Hyperboloid Reflective Wavesource, the Configurable Directivity Flange, the Directivity Phase Device and an unique DSP-driven cardioid LF section.
Multiple T4805s and T2815s combine to form a single very high output source of coherent acoustic energy. GEOSoft, our compiled Matlab application, makes it easy to determine the wavefront curvature that will deliver equal power to equal areas in any venue. Mixing engineers are discovering that GEO Technology delivers all the detail of a mix to the entire audience. With equal SPL from front to rear of the listening area, the dynamics of the performance are experienced at every seat. GEO systems are smaller, lighter, faster loading and rigging, without sacrificing anything in terms of power, dynamics or detail. Dramatically lower production costs translate to significantly higher profits for owners and operators of GEO systems.
Features
- T4805 can be deployed in horizontal or vertical tangent arrays
- High power, long excursion neodymium 8" woofer delivers full range output from compact enclosures.
- Light weight (13kg per module including precision array assembly system) construction allows GEO tangent arrays to be hung almost anywhere.
- Configurable Directivity Device allows dispersion in the noncoupling plane to change from 80° to 120° through bolt-on flanges that alter the flare of the diffraction slot's exit.
- Directivity Phase Device combines enhanced line source coupling in vertical arrays with extended low frequency response.
- GEOSoft array design software predicts vertical tangent array performance for a wide range of venues.
Specifications with NX242 TDController
Frequency Response[a]: | 67Hz - 19kHz ± 3dB |
Usable Range @-6dB[a]: | 60Hz - 20kHz |
Sensitivity 1W @ 1m[b]: | 99dB SPL Nominal 97dB SPL Wideband |
Peak SPL @ 1m[b]: | Configuration dependent[d] |
Dispersion[c]: | Coupling Plane: Not usable as a single cabinet. Configuration dependent[d]. |
Directivity Index[c]: | Not usable as a single cabinet. Configuration dependent[d]. |
Non-Coupling Plane: | 120° (configurable to 80°) |
Crossover Frequencies: | 1.6kHz Passive |
Nominal Impedance | 16Ω |
Recommended Amplifiers: | 1500 to 3000-w into 4Ω / 4x cabinets per channel. Up to 6x cabinets per channel may be connected to large amplifiers capable of operating into low impedance loads. |
Connectors | 2x NL4MP 4-pole SPEAKON (in & through) |
Net Weight: | 13kg |
Speakon Connectors: | 2 x 4 pole (Passive In & Loop Thru) + 1 x 4 Pole (Active In) |
Construction: | Baltic birch ply finish w/structured black coating. Dark grey carpet is optional. |
Shape: | 5° Trapezoid |
Flying: | Integral flying system. Intercabinet Angle Adjustments = 17.5° & 30° |
Fittings: | Grille Perforated Steel |
- [a] Response Curves and Data: Anechoic Far Field above 300Hz, Half-space below 300Hz. Usable Range Data: Frequency Response Capability with TD crossover slopes removed
- [b] Sensitivity & Peak SPL: will depend on spectral distribution. Measured with band limited Pink Noise. Refers to the specified +/- 3dB range. Data are for Speaker + Processor + recommended amplifier combinations
- [c] Directivity Curves and Data: 1/3 octave smoothed frequency response, normalized to On-Axis response. Data obtained by computer processing of off-axis response curves
- [d] Please refer to the GEO User Manual.
Tech Downloads
- Nexo Ease Data, zip Format (2.81 MB)
- Nexo GEO T Series Manual, pdf Format (5.79 MB)
Sales Brochures
- Nexo GEO Series Brochure, pdf Format (2.81 MB)
Media Resources
- GEO T4805 Rear Side, jpg Format (280 KB)
- GEO T4805 Rigging Detail, jpg Format (508 KB)
- GEO T4805 Side, jpg Format (342 KB)