P2110 Weatherproof Two Way Loudspeaker System

The P2110 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.

P2110 Weatherproof Two Way Loudspeaker System

The highfrequency section is a constant directivity CMD horn loaded to a 1" RCF Precision Neodymium compression driver with a 1.50" diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10" woofer with a 2.5" voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected.

The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable.

The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. The system features a selectable line transformer for 70 - 100 Volt applications.

P2110 Weatherproof Two Way Loudspeaker System Cluster


  • Weatherproof cabinet
  • Aluminium grill and stainless steel bracket
  • One 10" high-output LF transducer with 2" voice coil
  • One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
  • 90° x 40° constant directivity horn
  • Built in passive crossover and selectable line transformer
  • 10° X 20° enclosure sides for array configurations
  • Active Mosfet Compression Driver Protection
  • LICC (Low Impedance Compensated Crossover) network
  • 12 brass suspension points (M8)


  • Outdoor Sound Reinforcement in small and medium spaces
  • High-Level AV Playback
  • Flown cluster configurations
  • Large speech systems
  • Music Sound Reinforcement

System Specification

Freq. Range (-10 dB): 95 Hz-20KHz
Freq. Range (-3 dB): 120 Hz-20KHz
Horizontal coverage angle: 90°
Vertical coverage angle: 40°
Directivity Factor Q: 11
System Sensitivity: 95 dB 1W @ 1m
Rated Maximum SPL: 118 dB @ 1m
System Nominal Impedance: 16Ω
Input Power Rating RMS: 200W
Input Power Rating Peak: 800W
Recommended Amplifier: 400W
Constant Voltage Line: 70/100V
Selectable Power: 70V/30W, 15W; 100V/60W, 30W
HF Protection: Dynamic
Crossover: 2 KHz


Frequency Nominal Impedance Input Power Rating Sensitivity
Low : 10" (250mm) With 2.5" (64mm) coil 16Ω 180W AES; 720W Peak 95 dB, 1W @ 1m
High :1.5" (35.5mm) throat, 1" (25.4mm) 25W AES; 100W Peak 106 dB, 1W @ 1m

Physical Specifications

Enclosure Trapezoidal, 10° Horizontal side angles, 20° Vertical side angles 8 mm Polyethylene rotomoulded
Input System: 4 x 1.5mm square, 5m Neoprene cable
Rigging Inserts: 12 x M8 inserts + U-Bracket and Pair of spacers.
Colour: Grey
Grille: Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
Height: 350mm
Width: 350mm
Depth: 320mm
Net Weight: 13.5Kg

P2110 Dimension Diagram

© 2019 Group Technologies Australasia Pty Ltd ACN 072 549 010 | Privacy | Terms of Trade