You are at: Products | Nexo | PS10 Loudspeaker System

PS10 Loudspeaker

The PS10 Loudspeaker can be safely driven with over 500 Watts of amplifier power, yet it is only half the weight and volume of standard trapezoidal systems. The dispersion, architecture and weight balance of the PS10 Loudspeaker are designed to provide both exceptional PA and stage monitor performance from a single product without compromise. This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user. Coupled with the horn's unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The 2-way passive 8 Ohm design uses a single amplifier channel to deliver bi-amped performance for less money, space and complexity.

PRODUCT FEATURES

• High power system (127dB Peak SPL @ 1m) with 10" LF and 1" HF drivers.
• Rotatable asymmetrical horn and unique cabinet architecture ensure versatility; user adaptable for both PA and stage monitoring applications.
• Two-way passive 8-Ohm design uses a single amplifier channel for simpler installation and lower cost.
• Sophisticated control electronics ensure reliable, linear operation.
• Supported with a full range of mounting and flying accessories.
  

Download PDF (196KB)

LS500 Subwoofer

The LS500 Subwoofer extends the usable range of the PS10 Loudspeaker to 38 Hz, providing high performance and high power output (134 dB Peak) in an extremely compact, light weight package. The PS10 TDController's integral sub section and combined signal (PS10 and LS500) Speakon wiring ensure cost effective and simple system implementation. One LS500 is typically used with 2 PS10 loudspeakers, additional units may be used for an enhanced effect.

PRODUCT FEATURES

• High power system (134dB Peak SPL @ 1m) with 15" VLF driver.
  
• VLF extension (to 38Hz) of PS10 Loudspeakers.
• Sophisticated control electronics ensure reliable, linear operation.
  
• Integral pole mount that supports 1 or 2 PS10 Loudspeakers.
  

Download PDF (164KB)

PS10 TDController

The PS10 TDController is an advanced analogue processor that allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve exceptional performance from such compact packages. The PS10 TD provides crossover, sensed amplifier control and system equalisation optimised for the PS10 and LS500. One PS10 TD has two inputs and three outputs, L, R and summed sub out, minimising installation cost and complexity. Like all Nexo processors, the PS10 TD provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies when and where necessary.

PRODUCT FEATURES

• Precision circuits engineered for the PS10/LS500 systems permit increased sound pressure and operational reliability
• Servo controlled VCEQs provide precise dynamic control without spectral imbalance
• 2 inputs and 3 outputs enable a single PS10 TD to manage multiple PS10 and LS500 products
• Comprehensive indicators and controls
  

Download PDF (188KB)

PS10 AMP

The PS10AMP is a dedicated amplifier that allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve exceptional performance from such compact packages. The integrated PS10 TDController provides crossover, sensed amplifier control and system equalisation optimised for the PS10 and LS500. Like all Nexo processors, the PS10AMP provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies when and where necessary.

The PS10AMP has two inputs, L and R, and three outputs, L, R and summed LSub out. The PS10AMP Configuration switch automatically configures the unit for 2 channel mode (LSub Off), where the PS10AMP drives 2 to 4 PS10 Loudspeakers in stereo ( 2x 850 Watts/4 Ohms) or 3 channel mode (Lsub On), where the PS10 AMP drives 2 PS10 Loudspeakers in stereo (2 x 430 Watts/ 8 Ohms) and 1 LS500 Subwoofer (850W/ 4 Ohms) with a summed mono signal of the L+R input signals. Since the Configuration switch also rewires the output connectors and displays PS10AMP mode status with LED indicators, the PS10AMP minimises installation cost and complexity while ensuring faultless performance.

PRODUCT FEATURES

• Precision circuits engineered for the PS10/LS500 systems permit increased sound pressure and operational reliability
• Servo controlled VCEQs provide precise dynamic control without spectral imbalance
• Automatically configured 2 or 3 channel modes allow the amplifier's 1700W power capability to be optimised for a variety of system configurations.
• Integrated TDController simplifies wiring and provides a precise match to the amplifier.
• Super silent, back to front variable speed fan.
• Comprehensive indicators and controls, inputs and outputs are all located on the front panel.
  

Download PDF (211KB)