 |
|
PS15 Loudspeaker - can be safely driven with over 1000
Watts of amplifier power, yet it has a small volume and reduced
weight. The dispersion, architecture and weight balance of the PS15
Loudspeaker are designed to provide both exceptional PA and stage
monitor performance from a single product without compromise. This
flexibility is realized by a proprietary constant directivity asymmetrical
dispersion horn, easily rotated in four positions by the user. Coupled
with the horn's unique progressive horizontal (50° to 100°)
and vertical (55°) dispersion, the most suitable pattern can
be selected for vertical or horizontal PA usage or wedge monitoring.
The 2-way passive 8 Ohm design uses a single amplifier channel to
deliver bi-amped performance for less money, space and complexity.
PRODUCT FEATURES
- High power system (134dB Peak SPL @ 1m) with 15" LF and
2" HF drivers.
- Rotatable asymmetrical horn and unique cabinet architecture
ensure versatility; user adaptable for both PA and stage monitoring
applications.
- Two-way, switchable passive or active design for precise performance
matching to user requirements.
- Sophisticated control electronics ensure reliable, linear operation.
- Supported with a full range of mounting and flying accessories.
Download PDF (192KB)
|
|
|
 |
LS1200 Subwoofer - Subwoofer extends the usable range of
the PS15 Loudspeaker to 29 Hz, providing high performance and high
power output (135 dB Peak) in an extremely compact, light weight
package. The PS15 TDController's integral sub section and combined
signal (PS15 and LS1200) Speakon wiring ensure cost effective and
simple system implementation. One LS1200 is typically used with
2 PS15 loudspeakers, additional units may be used for an enhanced
effect.
PRODUCT FEATURES
- High power system (135dB Peak SPL @ 1m) with 18" VLF driver.
- VLF extension (to 29Hz) of PS15 Loudspeakers.
- Sophisticated control electronics ensure reliable, linear operation.
- Integral pole mount that supports 1 PS15 Loudspeaker.
Download PDF (162KB)
|
|
|
|
|
PS15 Bass - increases sound pressure levels in the 40 to
200 Hz regions for bass heavy applications and when single PS15s
are used without the benefits of multiple cabinet coupling. The
PS15 Bass is connected in parallel with a PS15 and doesn't require
an additional controller or amplifier channel (providing the combined
load is within the amplifier's specification). The PS15 Bass has
the same size front and grill, so clusters are visually and acoustically
coherent. Its deeper trapezoidal cabinet provides increased volume
for extended bass response.
PRODUCT FEATURES
- High power bass reinforcement for PS15 (134dB Peak SPL @ 1m)
with 15" LF driver.
- Low phase shift passive crossover.
- PS15 compatible shape and architecture.
- Easy set-up and cabling.
- Sophisticated control electronics ensure reliable, linear operation.
Download PDF (171KB)
|
|
|
|
PS15 TD Controller MkII
The PS15 TD Controller MkII is an advanced analogue processor
that allows the PS15 Loudspeaker and optional PS15Bass and LS1200
Subwoofers to achieve exceptional performance from such compact
packages. The PS15 TD MkII provides crossover, sensed amplifier
control and system equalisation optimised for the PS15, PS15Bass
and LS1200. The PS15 TD MkII also features user selectable passive
or active (bi-amp) operation of the PS15 Loudspeaker. One PS15 TD
MkII has two inputs and three outputs, including summed sub out,
minimising installation cost and complexity. Like all Nexo processors,
the PS15 TD MkII provides precision dynamic, voice coil temperature
and diaphragm displacement protection through the use of selective
Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies
when and where necessary.
PRODUCT FEATURES
- Precision circuits engineered for the PS15/PS15BASS/LS1200 systems
permit increased sound pressure and operational reliability
- User configurable for passive or active (bi-amp) operation of
the PS15 Loudspeaker.
- Servo controlled VCEQs provide precise dynamic control without
spectral imbalance
- 2 inputs and 3 outputs enable a single PS15 TD MkII to manage
multiple PS15, PS15Bass and LS1200 products.
- Comprehensive indicators and controls
Download PDF (333KB)
|
|
Home
Products
