RCF TTL33-A Three-Way Array Module
Advanced technologies, knowledge, experience, continuous engineering effort and dedication enabled RCF to the TL33-A, an active, ultra compact, wide dispersion, line array module that sets a new standard in touring and theatre sound reinforcement. Small like a "mini" array that sounds bigger than a "compact".
The design philosophy for the new TT+ series is based upon offering the sound engineer solutions and tools that are ready to use. Key factors are the ability to sustain very high power with highly efficient sound pressure levels. Intense sound levels are created with extremely high definition and extended dynamic range. Modern construction materials result in mechanical weight ratios that are light for practical flying and portability.
TT+ High Definition Products
Digital processing
An integrated digital processor is based on a state of the art 24-bit, floating point DSP running at 96 KHz sampling rate. The calculation capacity largely exceeds the processing needs and the DSP is never pushed to the limit. Crossover and equalization of the six transducers, limiter, and system presets: high pass, air absorption and cluster size corrections.
Digital power
A 750-watt switching power supply and 3 digital amplifiers power the TTL33-A: 500-watt mid-bass, 500-watt midrange and 250 watt compression driver. Very high output, extremely low distortion and natural sound. All the amplifiers and digital processing are housed in an aluminium extrusion external to the cabinet for best heat dissipation.
Compression drivers
A new compression driver unit has been developed in RCF specifically for array applications. The best ratio between the size of the diaphragm and the overall diameter and the very small total size makes the ND1411- MT a unique driver for application in line on straight horns. TTL33-A houses 3 of them for perfect HF control.
Controlled mid-bass
Two light and reliable neodymium 8", in a band pass loading configuration, provides a tight and loud midbass. Thanks to a careful acoustic design the sensitivity in the 100 Hz region is almost double than typical, same size, designs.
High output midrange
A fast and accurate horn loaded 8" takes care of the midrange frequencies. Powerful neodymium magnet, aluminium die cast basket, aluminium back can in direct contact to the rear plate for best heat dissipation.
Reliable mechanics
Laser cut high quality steel bars and precision machining for an easy to use and reliable mechanics. Thanks to the very light weight of the cabinet building the cluster is very simple, fast and effortless.
Acoustical Specifications
- Frequency Response : 60 - 20 Khz
- Spl Peak : 134 Db
- Sensitivity: X
- Horizontal Coverage: 100°
- Vertical Coverage Angle : 15° Max, Depending On Config.
- Compression Driver: 3 X 1" Neo, 37 Mm Voice Coil
- Midrange: 8”Neo, 64 Mm Voice Coil
- Woofer: 2 X 8” Neo, 64 Mm Voice Coil
Input Section
- Input Signal: Balanced/Unbalanced
- Input Connector: Xlr
- Output Connector: Xlr
- Input Sensitivity: - 2 Dbu / + 4 Dbu
Processor Section
- Crossover Frequencies: 400 Hz, 1800 Hz
- Protections: Thermal, Hf
- Sensitivity Control: Yes
- Limiter: Fast Limiter
- Phase Switch: X
- High Pass: Yes, 100 Hz
- Controls: Hf Correction, Cluster Size
Amplifer
- Power Supply: Switching 750-Watt
- High Frequencies: D/250-Watt
- Mid Frequencies: D/500-Watt
- Low Frequencies: D/500-Watt
- Cooling: Convection/Forced
- Connection: Powercon In/Out
Physical Specifications
- Height: 300 Mm
- Width: 760 Mm
- Depth: 450 Mm
- Weight: 32 Kg
- Cabinet: Baltic Birch
- Hardware: Side Fly Fittings
- Handles: 2 On Side
- Pole Mount/Cap: X
- Colour: Black
