GT AustralasiaSubscribe to Filter eMagazine
Group Technologies Group Technologies HomeProductsProfileDownloadsNewsPartners in ActionGT PartnersFilter NewsletterContact

RCF [More Info]

RCF Custom Shop

Manuals/Brochures

RCF ART 315i 2-Way Speaker  300-Watt  15"Woofer

Art Series
ART 315i 2-Way Speaker 300-Watt 15"Woofer

ART 312, ideal for any installation and offers thesame careful acoustic design and innovativetransducers used in the active series.Very good bass reproduction and extremelyaccurate high frequencies, ART 312-i is theperfect solution for playback and installationsituations where an external amplifier isrequired.

ART 315, ideal for live sound situations, offer thesame careful acoustic design and innovativetransducers used in the active series. Very goodpunch in bass reproduction and extremelyaccurate high frequencies, ART 315 is the perfectsolution for playback and installation situationswhere an external amplifier is required.

RCF ART 315 and they RCF ART 315 are a widedispersion, 2 way sound reinforcement speaker.Integrates a high power LICC high levelcrossover network and RCF low distortion, highpower transducers. The new 15" inch and 15"woofer are the result of the latest refinementin years of RCF experience in compact 2 wayspeaker manufacturing, resulting in an accuratereproduction of the midbass frequency rangeand a tight punchy bass.

The compression driver uses a new 1.5" titaniumdome in front of a low compression, optimisedgeometry, radial phase plug. This innovativedesign is powered from a high flux neodymiummagnet and offers a very open and naturalmidrange sound and extreme precision in highfrequency reproduction.

Our LICC low impedance compensated crossovernetwork featuring lower (than conventional)induction value in series with the wooferoffer delay reduction, reduced phase shift andsuperior transient response. The compressiondriver is protected by a fast dynamic electroniccircuit. The input section presents 2 x NL4Speakon connectors offering an easy loopthroughlink.

Features

  • 300 watt power handling.
  • 127/128 dB SPL peak.
  • Wide dispersion, 90° x 60° low distortion, constant directivity horn.
  • 12"/15" high power woofer, 64mm edge wound aluminium coil.
  • 1" neodymium, titanium dome, high frequency driver.
  • LICCâ„¢ low impedance compensated crossover, electronic driver protection.
  • 2x NL4 Speakon® connector.
  • Two side handles and 1 ergonomic top handle for easy transportation and positioning.
  • Four M10 fly points and pole mount adaptor.

Acoustical specifications

  • Frequency Response: 50-20Khz
  • Max SPL: 127dB
  • Sensitivity 1w/1m: 98
  • Coverage Angle: 90°x60°
  • Compression Driver: neo 1"
  • Midrange: -
  • Woofer: 15"
  • Power Handling: 300W

Input section

  • Input Signal- Impedance: 8 Ω
  • Input Connector: Speakon®
  • Output Signal Connector: Speakon®

Physical specifications

  • Height (mm): 680
  • Width (mm): 407
  • Depth (mm): 347
  • Weight: 17 Kg
  • Cabinet: Composite PP
  • Hardware: Four M10 flying points
  • Handles: 2 Side, 1 Top
  • Pole-Mount/Cap: yes
  • Colour: Anthracite Grey

Art Series Product Range

Accessories Available

Padded BagRoad CaseMounting HardwareFull Face GrilleRemote Control

Technologies Inside

LICC Low Impedance Compensated Crossover

LICC LOW IMPEDANCE COMPENSATED CROSSOVER

All RCF passive speakers are equipped with high power handling low impedance crossover designs. The low impedance compensated crossover is an RCF first, and a breakthrough in crossover design. Conventional passive crossovers have an approximate 180 degree phase shift between the woofer and tweeter at the crossover point.

Such a system cannot reproduce transients correctly, causing negative effects on sound accuracy that are particularly noticeable with violin, trumpet, piano and vocals. Very low inductance values are used in the LICC, thus providing an excellent transient response and drastically reducing phase shifts between woofer and tweeter. As a result, LICC provides well-defined natural and open sound—across the entire audio bandwidth.

Neodymium Magnets

NEODYMIUM MAGNETS

RCF Precision Compression Drivers and Woofers come equipped with high thermal performance with high performance lightweight Neodymium magnets, offering advantages in system portability and high frequency clarity (due to the force of magnetic flux in the gap exceeding 2 kilogauss).

Specific attention has been paid to magnetic circuit polarisation for optimum thermal immunity.

 Pure Titanium Diaphragm

PURE TITANIUM DIAPHRAGM

RCF has developed an oxygen free process of moulding pure titanium ultra thin films in high quality, finely controlled shaped diaphragms.

The RCF process offers superior sonic quality, extended to the highest audible frequencies which guarantee consistent power handling and reliability.

Product Features

WATT ICON

Represents the total amplifier power for active speakers or power handling for passive speakers.

SPEAKER VISUAL ICON

Describes the number of ways and size of transducers.

CAR,VAN, TRUCK ICON

helps you in understanding size and portability of the product.

PP COMPOSITE ICON

Describes the cabinet material as polypropylene composite plastic.

POLE MOUNT ICON

Represents if the product is pole-mountable or if the sub-woofer has a pole cap.

FLYING HARDWARE ICON

Represents if the product offers standard flying hardware.